Anvisa Plans Visit to BAT and AstraZeneca Facilities

Jan.17.2025
Anvisa Plans Visit to BAT and AstraZeneca Facilities
Anvisa to inspect BAT and AstraZeneca facilities amid e-cigarette debate, without disclosing exact agenda or visit schedule.

According to a report from Jota on January 15th, the Brazilian National Health Surveillance Agency (Anvisa) plans to allocate approximately 70,000 reais (about $10,000) to dispatch two directors and two staff members to visit the production facilities of British American Tobacco (BAT) and pharmaceutical company AstraZeneca next week. The visits are expected to take place between January 28th and 31st. The mission was approved last week, but specific objectives have not yet been determined, and the visit times for each facility have not been disclosed.


The visit took place at a time when the pressure was mounting for the introduction of e-cigarettes in the country. This issue is currently being discussed in Congress and has previously been debated within Anvisa. In April 2024, the board of Anvisa decided to maintain the ban on e-cigarettes based on the principle of prevention. They believed that these devices should only be produced and sold if safety evidence is provided, but as of now, there is no research to support this.


The task has raised concerns among internal Anvisa employees, who state that there are currently no discussions related to tobacco taking place. JOTA interviewed Anvisa's board members, who stated that this type of visit is a routine practice and does not require a specific reason. Even if there are no specific discussions or regulatory agenda items, inspections of regulated industry production sites will still take place. In response to inquiries from the public, Anvisa did not provide specific details about the itinerary of the visit, only stating in a release that there are no plans to reintroduce e-cigarette-related topics to Anvisa's regulatory agenda at this time.


We welcome news tips, article submissions, interview requests, or comments on this piece.

Please contact us at info@2firsts.com, or reach out to Alan Zhao, CEO of 2Firsts, on LinkedIn


Notice

1.  This article is intended solely for professional research purposes related to industry, technology, and policy. Any references to brands or products are made purely for objective description and do not constitute any form of endorsement, recommendation, or promotion by 2Firsts.

2.  The use of nicotine-containing products — including, but not limited to, cigarettes, e-cigarettes, nicotine pouchand heated tobacco products — carries significant health risks. Users are responsible for complying with all applicable laws and regulations in their respective jurisdictions.

3.  This article is not intended to serve as the basis for any investment decisions or financial advice. 2Firsts assumes no direct or indirect liability for any inaccuracies or errors in the content.

4.  Access to this article is strictly prohibited for individuals below the legal age in their jurisdiction.

 

Copyright

 

This article is either an original work created by 2Firsts or a reproduction from third-party sources with proper attribution. All copyrights and usage rights belong to 2Firsts or the original content provider. Unauthorized reproduction, distribution, or any other form of unauthorized use by any individual or organization is strictly prohibited. Violators will be held legally accountable.

For copyright-related inquiries, please contact: info@2firsts.com

 

AI Assistance Disclaimer

 

This article may have been enhanced using AI tools to improve translation and editorial efficiency. However, due to technical limitations, inaccuracies may occur. Readers are encouraged to refer to the cited sources for the most accurate information.

We welcome any corrections or feedback. Please contact us at: info@2firsts.com

PMTA Manufacturing Panel Sees Small Firms Warn “Unknown Is Death” as FDA Defends Review Boundaries
PMTA Manufacturing Panel Sees Small Firms Warn “Unknown Is Death” as FDA Defends Review Boundaries
During FDA’s Feb 10 PMTA roundtable (manufacturing controls panel), small ENDS manufacturers warned that uncertainty in manufacturing expectations creates existential financial risk. FDA officials reiterated review flexibility is constrained by statutory and scientific boundaries. The panel debated testing standards, documentation requirements, open-system responsibility, supply chain changes, and software updates—highlighting unresolved PMTA challenges for small manufacturers.
Feb.11
JT Delivers Record FY2025 Results as RRP Accelerates and Ploom Expands Globally
JT Delivers Record FY2025 Results as RRP Accelerates and Ploom Expands Globally
JT reported record FY2025 revenue and adjusted operating profit, supported by combustible resilience and accelerating reduced-risk product growth. Heated tobacco volumes surged, led by Ploom. The group confirmed a major three-year RRP investment plan and projected further growth in 2026.
Feb.12
KT&G Approves Plan to Establish Guatemala Branch as First Local Base in Central and South America
KT&G Approves Plan to Establish Guatemala Branch as First Local Base in Central and South America
KT&G has approved a plan to establish a branch in Guatemala, which will serve as its first local base in Central and South America. The company is currently preparing office space, staffing, and operating systems. KT&G said the branch is intended to secure a regional distribution base and will focus on local channel management and new sales channel expansion. Meanwhile, overseas cigarette revenue in 2025 exceeded the domestic share for the first time.
Mar.09 by 2FIRSTS.ai
JTI UK Updates Nordic Spirit Packaging to Strengthen “Strength and Flavour” Guidance
JTI UK Updates Nordic Spirit Packaging to Strengthen “Strength and Flavour” Guidance
Japan Tobacco International UK (JTI UK) has unveiled a refreshed brand identity for Nordic Spirit nicotine pouches. The new packaging is now live on JTI360 and will roll out to shelves over the coming months. The updated design strengthens on-pack guidance on strength and flavour, adding slower/faster release cues and a six-dot strength system (6–17mg). Each can contains 20 pouches and includes a lid compartment for storing used pouches before disposal.
Mar.04 by 2FIRSTS.ai
Isle of Wight councillors raise concerns about youth vaping; one says it may be seen “akin to asbestos”
Isle of Wight councillors raise concerns about youth vaping; one says it may be seen “akin to asbestos”
Concerns about the effects of vaping on young people and public health were raised at County Hall, the report said, with Cllr Chris Jarman saying it may one day be viewed as “akin to asbestos.” Jarman cited NHS-related research and a case highlighted by Hull University Teaching Hospitals NHS Trust: a 15-year-old admitted with chest pain and breathing difficulty who reported cannabis use and vaping about 500 puffs per day and was diagnosed via CT with “air leak syndrome.”
Feb.27 by 2FIRSTS.ai
China Tobacco Hubei Industrial Co., Ltd Tests New Gas Release Nicotine Pouch Technology, According to Patent Documents
China Tobacco Hubei Industrial Co., Ltd Tests New Gas Release Nicotine Pouch Technology, According to Patent Documents
China Tobacco Hubei Industrial Co., Ltd applies for patents on new nicotine pouch technology with gas release feature.
Mar.04 by 2FIRSTS.ai